The use and maintenance of small film blowing machine

1, blow molding transparent container to be highly polished mold cavity, the production process every other time to polish. Take the soft tissue to polish and polishing the mold cavity to rub a small amount of polishing agent into the mold cavity surface, then use a clean cotton polishing, until the cavity mirror appears so far. When polishing to often replace the tissue paper, lest scratch cavity.
2, blow mold clamping edge of the mouth after the wear to skilled workers to repair the mold. The shear block of the neck of the blow molding die and the shear sleeve on the air inlet rod are the key components. For example, when the shear block edge is not evenly worn, the container will leak when it is used.
3, blow mold cooling channel due to blockage or corrosion and affect the flow of cooling medium, should immediately liquidation.
4, blow mold guide column and guide sleeve to be lubricated regularly, every year at least once a year to ensure that the two halves of the mold alignment, improve die life.
5, every time to stop production or blow mold to inventory, to use compressed air blow mold cooling holes, mold cavity to be coated with protective agent to avoid corrosion.