Location:Home > News information > Solution > 正文
Contact
Dongguan Baoding Precision Instrument Co. Ltd.
Miss.Cai 13717346368
Telephone: 0769-85588096Fax: 0769-82688299
Email: 13717346368@163.com
URL: www.baodingyiqi.com
Address: No. nine Park Avenue, Houjie Town, Guangdong, Dongguan, China, No. 23
The mixer works on the operation of a small mixer
The mixer works on the operation of a small mixer
1, start the host, to be two sound, ammeter current instructions, in accordance with the requirements of the process to the mixing room filling. Such as wind block, plate and other materials of higher hardness, two mixing, it is necessary to use a cutting machine to cut a section of material, so as not to stop the machine. After feeding, the top bolt knob to "down" position, the top bolt will drop, drop in the process of machine running current will increase, as the current exceeds the set, the machine will automatically top bolt up, current decreases again after the fall. Pull the door handle upward and close the chamber door.
2, when the mixing chamber temperature reaches the set temperature, temperature alarm sound and light alarm, the top bolt knob to "up" position, the top bolt rises to the upper rotating mixing chamber turning knob to "turn" the position of the mixing chamber will turn outward discharging, sound and light alarm alarm lamp the small car, placed in the mixing chamber is connected with the material receiving personnel application prepared in advance of wood or bamboo material mixing chamber on the net, no dig material in the mixing chamber by hand, after discharge, and sends a signal mixer operator, the operator according to the work requirements. (such as work, the mixing chamber turning knob to "return" position in the mixing chamber and automatically stop after returning to work, such as the main motor will stop to stop working, press the stop button, the host, then the mixing chamber knob to the "back" position, waiting for the next time work, the mixing chamber will automatically stop after the handle knob in the middle position)
Dongguan Baoding Precision Instrument Co., Ltd was founded in 1999, products include rubber, plastics, footwear, chemical industry, main products: laboratory flat vulcanizing machine, pressing machine, mixing machine, mixer machine, film blowing machine, extrusion machine etc..
Company R & D and manufacturing as a whole, using the German advanced technology, the introduction of high-tech talent, the establishment of modern enterprise system, and constantly improve the management, development and constantly develop new products, its technical content, the degree of automation is the national leading level. At the same time, the company's internal strengthening of management, foreign attention to good faith, high-quality products to win customers at home and abroad alike.
Contact: Mr. Ning, 13532886368
Telephone: 0769-85588096
Fax: 0769-82688299
Q Q:799728999
Mailbox: 13532886368@163.com
URL: http://www.baodingyiqi.com
Address: No. 27, nine Garden Avenue, Houjie Town, Guangdong, Dongguan
1, start the host, to be two sound, ammeter current instructions, in accordance with the requirements of the process to the mixing room filling. Such as wind block, plate and other materials of higher hardness, two mixing, it is necessary to use a cutting machine to cut a section of material, so as not to stop the machine. After feeding, the top bolt knob to "down" position, the top bolt will drop, drop in the process of machine running current will increase, as the current exceeds the set, the machine will automatically top bolt up, current decreases again after the fall. Pull the door handle upward and close the chamber door.
2, when the mixing chamber temperature reaches the set temperature, temperature alarm sound and light alarm, the top bolt knob to "up" position, the top bolt rises to the upper rotating mixing chamber turning knob to "turn" the position of the mixing chamber will turn outward discharging, sound and light alarm alarm lamp the small car, placed in the mixing chamber is connected with the material receiving personnel application prepared in advance of wood or bamboo material mixing chamber on the net, no dig material in the mixing chamber by hand, after discharge, and sends a signal mixer operator, the operator according to the work requirements. (such as work, the mixing chamber turning knob to "return" position in the mixing chamber and automatically stop after returning to work, such as the main motor will stop to stop working, press the stop button, the host, then the mixing chamber knob to the "back" position, waiting for the next time work, the mixing chamber will automatically stop after the handle knob in the middle position)
Dongguan Baoding Precision Instrument Co., Ltd was founded in 1999, products include rubber, plastics, footwear, chemical industry, main products: laboratory flat vulcanizing machine, pressing machine, mixing machine, mixer machine, film blowing machine, extrusion machine etc..
Company R & D and manufacturing as a whole, using the German advanced technology, the introduction of high-tech talent, the establishment of modern enterprise system, and constantly improve the management, development and constantly develop new products, its technical content, the degree of automation is the national leading level. At the same time, the company's internal strengthening of management, foreign attention to good faith, high-quality products to win customers at home and abroad alike.
Contact: Mr. Ning, 13532886368
Telephone: 0769-85588096
Fax: 0769-82688299
Q Q:799728999
Mailbox: 13532886368@163.com
URL: http://www.baodingyiqi.com
Address: No. 27, nine Garden Avenue, Houjie Town, Guangdong, Dongguan
